板式家具结构设计有限元法研究综述

编号 lyqk008181

中文标题 板式家具结构设计有限元法研究综述

作者 胡文刚  关惠元 

作者单位 1. 南京林业大学家居与工业设计学院, 南京 210037;
2. 南京林业大学林业资源高效加工利用协同创新中心, 南京 210037

期刊名称 世界林业研究 

年份 2020 

卷号 33

期号 2

栏目编号 1

栏目名称 专题论述 

中文摘要 文中总结、分析了有限元法在板式家具结构设计中的应用现状，并对该领域的未来研究趋势进行了阐述。国内外现有研究主要集中于板式家具在静载荷下的强度或刚度的有限元分析，研究对象多为板式家具构件或整体，而大多忽略了节点对板式家具整体强度的影响。未来可进一步从以下几方面进行深入研究：1）板式家具节点有限元模型的建立及其简化方法；2）板式家具结构耐久性有限元分析方法；3）板式家具的整体结构优化方法；4）板式家具结构设计有限元模块的二次开发；5）板式家具的智能设计及制造系统开发。

关键词 板式家具  结构设计  节点  有限元法  智能设计及制造 

基金项目 南京林业大学高层次人才科研启动基金（GXL2019074）；江苏高校优势学科建设工程资助项目（PAPD）。

英文标题 Review of Research on Application of Finite Element Method to Panel Furniture Structure Design

作者英文名 Hu Wengang, Guan Huiyuan

单位英文名 1. College of Furnishings and Industrial Design, Nanjing Forestry University, Nanjing 210037, China;
2. Jiangsu Co-innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210037, China

英文摘要 The current application of finite element method (FEM) to panel furniture structure design is summarized and analyzed, and the future research directions in this field are expounded. Current studies at home and abroad are focused on the strength and stiffness of panel furniture based on FEM, and put more attention to the entire furniture or furniture parts than the influence of joints on entire panel furniture. It is proposed to do the further studies on following fields: 1) the establishment of the finite element model of panel furniture joint and its corresponding simplified methods; 2) PEM for the durability of panel furniture; 3) the ways to optimize the overall structure of panel furniture; 4) FEM modulus development for the structure design of panel furniture; and 5) intelligent design and manufacturing system development for panel furniture.

英文关键词 panel furniture;structure design;joint;finite element method;intelligent design and manufacturing

起始页码 68

截止页码 71

投稿时间 2019-07-13

最后修改时间 2019-08-12

作者简介 胡文刚,男,博士,主要从事家具设计及理论、家具有限元模型研究,E-mail:hwg@njfu.edu.cn。

通讯作者介绍 关惠元,男,教授,博导,主要从事家具设计及理论、家具结构设计研究,E-mail:guanhuiyuan@njfu.edu.cn。

E-mail 关惠元，guanhuiyuan@njfu.edu.cn

分类号 S781.29

DOI 10.13348/j.cnki.sjlyyj.2019.0099.y

参考文献 [1] ECKELMAN C A,SUDDARTH S K.Analysis and design of furniture frames[J].Wood Science and Technology,1969,3(3):239-255.
[2] 蔡葵,陈于书.家具结构有限元分析研究综述[J].家具与室内装饰,2015(9):18-19.
[3] 张磊,钟世禄,裴文刚,等.有限元软件ABAQUS在家具结构分析中的应用[J].家具,2015,36(5):22-26,38.
[4] 张国梁,蔡小娜,刘志军,等.ANSYS软件在板式家具结构优化设计的应用[J].中国人造板,2011,18(5):9-12.
[5] 程洛林,徐伟,黄琼涛,等.基于Solidworks的变形家具功能型结构仿真分析[J].家具,2019,40(3):44-50.
[6] 丁菲,钟世禄.基于有限元法的儿童高椅稳定性的仿真分析[J].家具与室内装饰,2017(9):14-15.
[7] 李文玲,徐伟,周晓燕,等.基于ABAQUS的层积异型座椅受力分析[J].家具,2018,39(4):5-9.
[8] ECKELMAN C A,RABIEJ R.A comprehensive method of analysis of case furniture[J].Forest Prodicts Journal,1985,35(4):62-68.
[9] ALBIN R.Durchbiegung und lastannahmenim korpusmöbelbau[J]. HolzalsRoh-und Werkstoff,1989,47(1):7-10.
[10] 蔡力平,余松宝,郭希强.板式家具结构强度分析[J].林业科学,1991,27(1):91-96.
[11] 王逢瑚,蔡力平.板式家具熔化喷射式角接合强度的研究[J].林业科学,1996,32(2):154-157.
[12] NICHOLLS T,CRISAN R.Study of the stress-strain state in corner joints and box-type furniture using finite element analysis (FEA)[J].HolzalsRoh-und Werkstoff,2002,60(1):66-71.
[13] 何风梅,沈隽,鲍含伦.板式家具结构强度设计的发展及现状[J].林业科学,2008,44(3):170-172.
[14] 何风梅.基于ANSYS的板式家具结构强度分析与优化设计研究[D].哈尔滨:东北林业大学,2008.
[15] SMARDZEWSKI J,SLONINA M,MASLEJ M.Stiffness and failure behaviour of wood based honeycomb sandwich corner joints in different climates[J].Composite Structures,2017,168:153-163.
[16] SMARDZEWSKI J.Critical buckling load of the side walls of cabinet furniture[C].Proceeding of the International Forest Products Congress,Trabzon,Turkey, 26-29 Sep 2018:886-893.
[17] SMARDZEWSKI J,LEWANDOWSKI W,IMIRIZI H O.Elasticity modulus of cabinet furniture joints[J].Materials and Design,2014,60(8):260-266.
[18] PODSKARAI M,SMARDZEWSKI J.Numerical modelling of new demountable fasteners for frame furniture[J].Engineering Structure,2019,185:221-229.
[19] 何风梅,沈隽,宋明强.ANSYS在板式家具强度分析中的应用[J].林业机械与木工设备,2007,35(10):52-54.
[20] 宋明强,沈隽.有限元法与ANSYS在家具结构分析中的应用[J].西北林学院学报,2008,23(1):174-177.
[21] 董宏敢.ANSYS在板式家具强度分析中的应用研究[J].林业机械与木工设备,2009,37(5):26-29.
[22] KOC K H,KIZILKAYA K,ERDINLER E S,et al.The use of finite element method in the furniture industry[J].African Journal of Business Management,2011,7(7):1105-1114.
[23] MARDZEWSKI J,DZICEGIELEWSKI S.Stability of cabinet furniture backing boards[J].Wood Science and Technology,1993,28(1):35-44.
[24] 宋明强.基于ANSYS的板式橱柜家具力学性能分析研究[D].哈尔滨:东北林业大学,2008.
[25] RUMAN D,GASPARIK M,ZABORSKY V.Application of FEM analysis for furniture fittings[J].Chip and Chipless Woodworking Processes,2016,10(1):347-350.
[26] 孙静.速生桉单板层积材家具的造型设计和结构研究[D].南京:南京林业大学,2012.
[27] SMARDZEWSKI J,RZEPA B,KILIC H.Mechanical properties of externally invisible furniture joints made of wood-based composites[J].Bioresources,2016,11(1):1224-1239.
[28] SMARDZEWSKI J,KRAMSKI D.Modelling stiffness of furniture manufactured from honeycomb panels depending on changing climate conditions[J].Thin-Walled Structures,2019,137:295-302.

PDF全文 浏览全文