数字图像相关技术及其在木材科学研究中的应用

编号 lyqk004824

中文标题 数字图像相关技术及其在木材科学研究中的应用

作者 赵景尧  蔡英春 

作者单位 东北林业大学材料科学与工程学院,哈尔滨 150040;东北林业大学材料科学与工程学院,哈尔滨 150040

期刊名称 世界林业研究 

年份 2015 

卷号 28

期号 6

栏目编号 1

栏目名称 专题论述 

中文摘要 数字图像相关方法(DIC)作为一种先进的光学形变(位移和应变)检测方法,已逐渐成为木材科学领域中一种重要的测试手段。文中概括了DIC的特点与基本原理;综述了其在木材科学领域中的应用,主要包括力学性能检测、木材干燥形变测量及其他木质基材料等的相关性能研究;最后,对其在木材科学领域研究中遇到的机遇与挑战进行了展望。

关键词 数字图像相关方法  位移  变形  木材科学  力学性能 

基金项目 国家自然科学基金(31270595);中央高校基本科研业务费专项资金资助(2572014AB21)

英文标题 Digital Image Correlation Technology and Its Application to Wood Science

作者英文名 Zhao Jingyao and Cai Yingchun

单位英文名 College of Material Science and Engineering,Northeast Forestry University,Harbin 150040,China;College of Material Science and Engineering,Northeast Forestry University,Harbin 150040,China

英文摘要 Digital image correlation (DIC) is considered as an advanced optical and deformed measured method to be an important tool in the field of wood science. This paper summarized the characteristics and principles of DIC, and expounded its application to the field of wood science, mainly including the determination of wood mechanical property, the measurement of deformation after wood drying and the studies on related property of other wood-based materials. Finally, the opportunities and challenges that could be met in wood science study were prospected.

英文关键词 digital image correlation;displacement;deformation;wood science;mechanical property

起始页码 53

截止页码 57

投稿时间 2015/3/23

分类号 S781

DOI 10.13348/j.cnki.sjlyyj.2015.06.006

参考文献 [1] 马少鹏.数字散斑相关法在岩石破坏测量中的发展和应用[D].北京:清华大学,2002:20-24.
[2] Peters W H, Rason W F, Sutton M A.Application of digital correlation methods to rigid body mechanics[J].Optical Engineering, 1983, 22(6):738-742.
[3] Yamaguchi I.A laser-speckle strain gange[J].Journal of Physics,1981,14(5):1270-1273.
[4] 金观昌.计算机辅助光学测量[M].北京:清华大学出版社,1997:54-66.
[5] 潘兵.数字图像相关方法及其在实验力学中的应用[D].北京:清华大学,2007:12-13.
[6] Pan B, Qian K, Xie H, et al.Two-dimensional digital image correlation for in-plane displacement and strain measurement:a review[J].Measurement Science and Technology, 2009, 20(6):1-17.
[7] Agrawal C P.Full 2-field deformation measurements in wood using digital image processing[D].Virginia:Virginia Polytechnic Institute and State University,1989:49-74.
[8] Choi D,Thorpe J L,Hanna R B.Image analysis to measure strain in wood and paper[J].Wood Science and Technology,1991, 25(4):251-262.
[9] Zink A G,Davidson R W,Hanna R B.Strain measurement in wood using a digital image correlation technique[J].Wood and Fiber Science, 1995, 27(4):346-359.
[10] Choi D,Thorpe J L,Cetew A.Quantification of compression failure propagation in wood using digital image pattern recognition[J].Forest Product Journal, 1996, 46(10):87-93.
[11] Zink A G, Hanna R B, Stmokas J W.Measurement of Poisson's ratios for yellow-poplar[J].Forest Product Journal, 1997, 47(3):78-80.
[12] Samarasinghe S, Kulasiri G D.Displacement fields of wood in tension based on image processing:part 1.tension parallel-and perpendicular-to-grain and comparisons with isotropic behaviour[J].Silva Fennica, 2000, 34(3):251-259.
[13] 徐曼琼,金观昌,鹿振友.数字散斑面内相关法测量木材抗压弹性模量[J].林业科学, 2003, 39(2):174-176.
[14] Suchsland O.The swelling and shrinking of wood:a practical technology primer[M].Madison:Forest Products Society, 2004:123-147.
[15] Serrano E, Enquist B.Contact free measurement and non-linear finite element analyses of strain distribution along wood adhesive bonds[J].Holzforschung, 2005, 59(6):641-646.
[16] Penneru A P, Jayaramanand K, Bhattacharyya D.Strain analysis in bulk forming of wood[J].Holzforschung, 2005, 59(4):456-458.
[17] Ljungdahl J, Berglund L A, Burman M.Transverse anisotropy of compressive failure in European oak:a digital speckle photography study[J].Holzforschung, 2006, 60(2):190-195.
[18] Konnerth J, Valla A, Gindl W.Measurement of strain distribution in timber finger joints[J].Wood Science and Technology, 2006, 40(8):631-636.
[19] Jeong G Y.Tensile properties of loblolly pine strands using digital image correlation and stochastic finite element method[D].Blacksburg,VA,USA:Faculty of Virginia Polytechnic Institute,2008:50-71.
[20] Bjurhager I, Berglund L A, Bardage S L, et al.Mechanical characterization of juvenile European aspen (Populus tremula) and hybrid aspen (Populus tremula×Populus tremuloides) using full-field strain measurements[J].Journal of Wood Science, 2008, 54(5):349-355.
[21] 龚翠芝,刘一星,王强,等.鱼鳞云杉微切片拉伸破坏的细观试验与应变场分析[J].林业科学,2008, 44(3):166-169.
[22] Jeong G Y, Zink-Sharp A, Hindman D P.Tensile properties of earlywood and latewood from loblolly pine using digital image correlation[J].Wood and Fiber Science, 2009, 41(1):51-63.
[23] Jeong G Y, Zink-Sharp A, Hindman D P.Applying digital image correlation to wood strands:influence of loading rate and specimen thickness[J].Holzforschung, 2010, 64(6):729-734.
[24] 龚翠芝,刘一星,王强,等.鱼鳞云杉TR型裂纹的演化与破坏模式[J].林业科学,2011,47(5):101-105.
[25] 孙艳玲,何龙,张青,等.8结点等参位移模式在数字散斑相关方法上的应用[J].东北林业大学学报,2012,40(2):109-113.
[26] Zhan J F,Gu J Y, Shi Q.Rheological behavior of larch timber during conventional drying[J].Drying Technology,2009, 27(10):1041-1050.
[27] Fu Z Y, Zhao J Y, Huan S Q, et al.The variation of tangential rheological properties caused by shrinkage anisotropy and moisture content gradient in white birch disks[J].Holzforschung,2015,69(5):573-579.
[28] 张璧光.我国木材干燥技术现状与国内外发展趋势[J].北京林业大学学报,2002,24(5/6):262-266.
[29] Kifetew G.Application of the deformation field measurement method to wood during drying[J].Wood Science and Technology, 1996, 30(6):455-462.
[30] Clair B, Jaouen G, Beauchene J, et al.Mapping radial, tangential and longitudinal shrinkage and relation to tension wood in discs of the tropical tree Symphonia globulifera[J].Holzforschung, 2003, 57(6):665-671.
[31] Kwon O, Hanna R.The enhanced digital image correlation technique for feature tracking during drying of wood[J].Strain, 2010, 46(6),566-580.
[32] Peng M K, Ho Y, Wang W C, et al.Measurement of wood shrinkage in jack pine using three dimensional digital image correlation (DIC)[J].Holzforschung, 2012,2(3):639-643.
[33] Larsen F, Ormarsson S.Numerical and experimental study of moisture-induced stress and strain field developments in timber logs[J].Wood Science and Technology, 2013, 47(4):837-852.
[34] Larsen F, Ormarsson S.Experimental and finite element study of the effect of temperature and moisture on the tangential tensile strength and fracture behavior in timber logs[J].Holzforschung,2014, 68(1):133-140.
[35] Nishimura T,Ansell M P, Ando N.The relationship between the arrangement of wood strands at the surface of OSB and the modulus of rupture determined by image analysis[J].Wood Science and Technology,2001,35(6):555-562.
[36] Vaclav Sebera, Lech Muszynski.Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulation[J].Holzforschung,2011,65(6):811-818.
[37] Davim J P,Rubio J C,Abro A M.Delamination assessment after drilling medium-density fiberboard (MDF) by digital image analysis[J].Holzforschung,2007,61(3):294-300.
[38] Davim J P,Rubio J C,Abrao A M.A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates[J].Composite Science and Technology,2007,67(9):1939-1945.
[39] 李霞镇,任海青,马少鹏.基于数字散斑相关方法的竹材变形特性[J].林业科学,2012,48(9):115-119.
[40] Beerschoten W A,Carradine D M,Carr A.Development of constitutive model for laminated veneer lumber using digital image correlation technique[J].Wood Science and Technology, 2014,48(4):755-772.
[41] Hass P,Wittel F K,McDonald S A,et al.Pore space analysis of beech wood:the vessel network[J].Holzforschung,2010,64(5):639-644.

PDF全文 浏览全文