编号
020035204
推送时间
20220718
研究领域
林产化工
年份
2022
类型
期刊
语种
英语
标题
Preparation of HNTs-d-GO hybrid nanoparticles for gallic acid epoxy composites with improved thermal and mechanical properties
来源期刊 Polymer Composites
期
第352期
发表时间
20220616
关键词
bio-based nanocomposites;
gallic acid epoxy resin;
graphene oxide;
halloysite nanotubes;
hybrid nanoparticles;
摘要
KH550 modified halloysite nanotubes (m-HNTs) were hybridized with sulfoxide chloride acylated graphene oxide (m-GO) to prepare hybrid nanoparticles (HNTs-d-GO). The microstructure and morphology analysis of HNTs-d-GO hybrid nanoparticles showed that the ordered lamellar structure of GO after acyl chlorination was stripped, and the organic groups on the surface of the lamellar increased. HNTs-d-GO hybrid nanoparticles were formed through the amidation of m-HNTs and m-GO. Then HNTs-d-GO hybrid nanoparticles were incorporated in galic acid epoxy resin to improve the thermal and mechanical properties. HNTs-d-GO/galic acid epoxy resin (HNTs-d-GO/GAER) bio-based nanocomposites were prepared with methyl tetrahydrophthalic anhydride as curing agent. The galic acid epoxy composites with the addition of HNTs-d-GO exhibited significant enhancements of impact strength, tensile strength, storage modulus, and glass transition temperature. The initial thermal decomposition temperature (T-5%) decreased, and the mass retention at 800 degrees C increased, thermal stability of HNTs-d-GO/GAER composites were enhanced. At an optimum concentration of 0.75 wt% HNTs-d-GO, a simultaneous increase in strength and toughness was observed in comparison to the unfilled cured resin, the impact strength is 2.87 kJ/m(2), which is 30.4% higher than pure GAER, and the tensile strength is 42.62 MPa, which is 29.2% higher than pure GAER. Compared with pure gallic acid epoxy resin, the content of HNTs-d-GO is 0.25 wt%, T-g increased by 28.9 degrees C.
服务人员
尚玮姣
服务院士
宋湛谦
PDF文件
浏览全文