正交胶合木横纹承压性能研究现状

编号 lyqk008153

中文标题 正交胶合木横纹承压性能研究现状

作者 熊珊  王志强 

作者单位 南京林业大学材料科学与工程学院, 南京 210037

期刊名称 世界林业研究 

年份 2020 

卷号 33

期号 1

栏目编号 1

栏目名称 专题论述 

中文摘要 正交胶合木（CLT）在木结构建筑中应用越来越广泛，特别是在中高层建筑物中。CLT作为楼盖构件使用时，承受柱或墙体施加的垂直荷载，因此CLT产品的设计及应用需要其横纹承压弹性模量和强度方面的参数；改善CLT横纹承压性能，也可以提高整体结构强度和建筑安全系数。文中主要介绍目前CLT横纹承压性能测试方法，总结CLT横纹承压性能影响因素方面的研究进展，以期为国内CLT研究提供参考。

关键词 正交胶合木  横纹承压  局部荷载  调整系数 

基金项目 国家自然科学基金项目（31570559）。

英文标题 Properties of Cross-laminated Timber in Compression Perpendicular to Grain

作者英文名 Xiong Shan, Wang Zhiqiang

单位英文名 College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China

英文摘要 Cross-laminated timber (CLT) has been widely used in wood frame structures, especially in medium and high-rise buildings. When it is used as a floor component, CLT bears the vertical load imposed by columns or walls. Therefore, the parameters of modulus of elasticity and strength in compression perpendicular to grain are needed for the design and application of CLT products. And the overall structural strength and the building safety coefficient can be improved with the improved properties of CLT in compression perpendicular to grain. This paper mainly introduces the current test method of CLT in compression perpendicular to grain, and summarizes the research progress of the influence factors of CLT in compression perpendicular to grain, to provide references for domestic CLT research.

英文关键词 cross laminated timber;compression perpendicular to grain;partly load;adjustment coefficient

起始页码 49

截止页码 53

投稿时间 2019/4/21

最后修改时间 2019/6/25

作者简介 熊珊,女,硕士研究生,研究方向为木结构建筑,E-mail:2791827905@qq.com。

通讯作者介绍 王志强,男,教授,研究方向为新型工程木产品和木结构建筑,E-mail:wangzhiqiang@njfu.edu.cn。

E-mail 王志强，wangzhiqiang@njfu.edu.cn

分类号 TS653.3

DOI 10.13348/j.cnki.sjlyyj.2019.0075.y

参考文献 [1] GAGNON S,PIRVU C.CLT handbook:cross-laminated timber[M].USA:FPInnovations and American Wood Council,2011.
[2] FALK A.Cross-laminated timber:driving forces and innovation[M]//PAULO J S C.Structures and architecture:new concepts,applications and challenges.London:CRC Press,2013:511-518.
[3] MALLO M F L,ESPINOZA O A.Outlook for cross-laminated timber in the United States[J].BioResources,2014,9(4):7427-7443.
[4] SERRANO E.Documentation of the Limnologen project:overview and summarize of sub projects results[M].Vaxjo:Vaxjo University,2009:37-42.
[5] ROSS R J.Wood handbook:wood as an engineering material[R].USDA Forest Service,Forest Products Laboratory,General Technical Report FPL-GTR-190,2010:509.
[6] CEN.Timber structures-Structural timber and glue laminated timber-determination of some physical and mechanical properties:BS EN 408[S].London:British Standards Institution,2010:23-27.
[7] BAUER H,SCHICKHOFER G.Test configurations and analysis for determining characteristic properties of cross laminated timber (CLT)[C].World Conference on Timber Engineering.Vienna:Technische Universität Wien,2016.
[8] BOGENSPERGER T,AUGUSTIN M,SCHICKHOFER G.Properties of CLT-panels exposed to compression perpendicular to their plane[C].International Council for Research and Innovation in Building and Construction,Working Commission W18-Timber Structures,Italy,2011:1-15.
[9] SERRANO E,ENQUIST B.Compression strength perpendicular to grain in cross-laminated timber (CLT)[C].World Conference on Timber Engineering,Italy,2010:441-448.
[10] BRANDER R,SCHICKHOFER G.Properties of cross laminated timber (CLT) in compression perpendicular to grain[C].International Network on Timber Engineering Research (INTER),United Kingdom,2014:209-223.
[11] BRANDNER R.Cross laminated timber (CLT) in compression perpendicular to plane:Testing,properties,design and recommendations for harmonizing design provisions for structural timber products[J].Engineering Structures,2018,171:944-960.
[12] KUNESH R H.Strength and elastic properties of wood in transverse compression[J].Forest Products Society,1968,18(1):65-72.
[13] CEN.Structural timber-Determination of characteristic values of mechanical properties and density:EN 384[S].United Kingdom:European Committee for Standardization,2010.
[14] CIAMPITTI A.Untersuchung ausgewählter Einflussparameter auf die QuerdruckkenngröBen von Brettsperrholz[D].Austria:Graz University of Technology,2013.
[15] GASPARRI E,LAM F,LIU Y.Compression perpendicular to grain behavior for the design of a prefabricated CLT façade horizontal joint[C].World Conference on Timber Engineering,Vienna,2016.
[16] HALILI Y.Versuchstechnische Ermittlung von QuerdruckkenngröBen für Brettsperrholz[D].Austria:Graz University of Technology,2008.
[17] SALZMANN C.Ermittlung von QuerdruckkenngröBen für Brettsperrholz (BSP)[D].Austria:Graz University of Technology,2010.
[18] CEN.Structural timber-strength classes:EN 338[S].United Kingdom:European Committee for Standardization,2016.
[19] HASUNI H K,AL-DOURI K,HAMODI M H.Compression strength perpendicular to grain in cross-laminated timber (CLT)[D]. Sweden:Växjö University,2009.
[20] VAN DER PUT T.Derivation of the bearing strength perpendicular to the grain of locally loaded timber blocks[J].Holz als Roh-und Werkstoff,2008,66(6):409-417.
[21] CEN.Timber structures-calculation of characteristic 5-percentile values and acceptance criteria for a sample:EN 14358[S]. United Kingdom:European Committee for Standardization,2007.

PDF全文 浏览全文